Expert Electrician Services in Lenexa, Kansas

Lenexa mixes quiet 1960s ranch streets with brand-new subdivisions, and the wiring in those homes couldn't be more different. Electrical Service Precision Pros works on all of it, from panel swaps in Old Town to EV chargers and generators in the newer neighborhoods. Call (833) 606-5080 and tell us what your home needs.

(833) 606-5080

Content last reviewed September 27, 2026

Electricians Who Know Lenexa Homes

Drive through Lenexa and you see two eras of Kansas City suburbia side by side. Around Old Town, ranch houses from the sixties and seventies still carry their original breaker panels, two-prong outlets, and wiring that was never meant to run a modern kitchen. Out west, whole subdivisions are only a few years old. The calls there look completely different: EV chargers, dedicated circuits for home offices, and smart-home setups that need clean power to behave.

Electrical Service Precision Pros serves both sides of the city. Our technicians spend their days on the work Lenexa actually calls for. That means electrical panel upgrades, whole-house rewiring, EV charger installation, generators, lighting, and the outlet and switch fixes that keep daily life running. We show up with shoe covers and a plan, and we leave the space cleaner than we found it.

Kansas weather shapes a lot of what we do here. Spring storms bring lightning and the surge damage that follows, which is why whole-house surge protection comes up in so many of our conversations. When winter ice takes down lines or a summer storm knocks out a feeder, the power can stay out for hours. A properly installed standby generator keeps the lights on without anyone dragging extension cords through the house.

The area's utility, Evergy, also plays a role in how jobs get scheduled. Panel upgrades and service changes sometimes need the meter pulled and re-sealed, which means coordinating with the utility and the city's inspection. We handle that scheduling as part of the job, so you are not spending your week on hold with two different offices.

One local wrinkle worth knowing: Lenexa's permit office has a habit of asking that smoke detectors be brought up to current standards when an electrical permit gets pulled. It is a safety upgrade most homeowners are glad to have, but it is better to hear about it in the quote than at inspection. We flag it upfront whenever a job involves a permit.

Lenexa isn't only houses, either. The office parks along the 87th Street and Renner corridors need electrical work of their own. So do the shops around City Center and the light-industrial buildings off I-435: tenant build-outs, dedicated circuits for equipment, parking-lot and security lighting, and code corrections flagged during inspections. Commercial jobs come with their own permitting rhythm and tighter schedules, so we plan them around your business hours. If you run a business in Lenexa and the electrical side of a remodel or expansion is on your list, the same crew that wires the neighborhoods can handle it.

Our electrician team at work on a home service call

Who We Are

A local crew for Lenexa and Johnson County

Some companies treat every house like the same house. We don't think that way. A ranch near Old Town with a tired 100-amp panel needs a completely different conversation than a new build getting its first EV charger. Our technicians are trained to read the house in front of them. We talk through what we find, explain the options in plain language, and quote the work before anything gets opened up. What we do is straightforward: show up on time, protect your home while we work, do the job to code, and stand behind it when we leave.
  • •Plain-language quotes: you see the scope and the cost before we touch a wire
  • •Code-correct work: every job is done to meet current code and pass inspection
  • •Respect for your home: shoe covers, drop cloths, and a full cleanup at the end
  • •One call handles it: we coordinate utility work and city permits with the job
  • •Straight answers: if a panel doesn't need replacing yet, we'll tell you that
  • •Local knowledge: we know how Lenexa homes are wired and what the inspectors look for

Professional Electrician Services in Lenexa, Kansas

Trusted Electrician solutions for residential and commercial properties, with clear communication and careful work.

Newly installed ceiling fan in a bright modern living room

Ceiling Fan Installation Near Me

Starting at: Call for pricing

A ceiling fan can make a room feel noticeably cooler without touching the thermostat — but only if it's mounted to a fan-rated box and wired correctly. Electrical Service Precision Pros installs and replaces ceiling fans with proper bracing, balanced blades, and the right controls, including remote and wall-switch options. If your current fan wobbles or hums, we can fix that too.

  • Installation on fan-rated boxes with proper ceiling bracing
  • Wiring for separate fan and light control
  • Remote, wall-switch, and smart control options
Electrician testing circuit breakers with a digital multimeter

Circuit Breaker Repair & Replacement Near Me

Starting at: Call for pricing

A breaker that trips now and then is doing its job — one that trips weekly, buzzes, or smells hot is telling you something is wrong. Electrical Service Precision Pros diagnoses whether the problem is a failing breaker, an overloaded circuit, or a deeper wiring issue, then repairs or replaces only what actually needs it. You get a straight answer and a panel you can trust again.

  • Diagnosis of chronic tripping, buzzing, or overheating breakers
  • Replacement of worn, damaged, or recalled breakers
  • Dedicated circuits added for overloaded rooms and appliances
Electrician closing a modern labeled breaker panel during a panel upgrade

Electrical Panel Upgrades Near Me

Starting at: Call for pricing

Electrical Service Precision Pros upgrades and replaces electrical panels so your home can safely handle the power you use today. If your breakers trip often, your panel is outdated, or you are adding big loads like an EV charger, we will inspect it and explain your options plainly.

  • Full panel inspection that checks breakers, bus bars, wiring, and grounding before any work starts
  • Panel replacement sized to your real electrical load, not a guess
  • New breakers and clearly labeled circuits so you know what controls what
Electrician inspecting a breaker panel with a clipboard and thermal camera

Electrical Safety Inspections Near Me

Starting at: Call for pricing

Most electrical problems announce themselves quietly — a warm outlet here, a flickering light there — until they don't. A safety inspection from Electrical Service Precision Pros checks your panel, wiring, outlets, grounding, and smoke/CO detectors against current code, and gives you a plain-language report of what's fine, what to watch, and what needs attention now. Ideal before buying, selling, or renovating.

  • Full panel inspection: breakers, labeling, corrosion, and capacity
  • Outlet and switch testing including GFCI/AFCI function
  • Grounding and bonding verification
Wall-mounted Level 2 EV charger plugged into an electric car in a home garage

EV Charger Installation Near Me

Starting at: Call for pricing

Charging at home beats hunting for a public station every week. Electrical Service Precision Pros installs dedicated Level 2 EV chargers wired straight to your panel, sized for your car and your daily driving. Call (833) 606-5080 and we will set up home charging that fits your routine.

  • Level 2 (240-volt) home charger installation
  • Panel load calculation before we size the circuit
  • Dedicated circuit run from panel to charger location
Standby home generator installed on a concrete pad beside a house

Generator Installation Near Me

Starting at: Call for pricing

When the power goes out, a standby generator keeps your home running without you lifting a finger. Electrical Service Precision Pros installs whole-home generators that start on their own the moment the grid drops. Call (833) 606-5080 to find the right size for your home.

  • Whole-home standby generator installation
  • Automatic transfer switch wired to your panel
  • Generator sizing based on your actual loads
Modern kitchen with new recessed and pendant lighting

Lighting Installation Near Me

Starting at: Call for pricing

Good lighting changes how a home feels and how it works. Electrical Service Precision Pros installs recessed lights, pendants, under-cabinet lighting, dimmers, and smart switches — wired cleanly and safely to code. If you're switching the whole house to LED, we help you pick fixtures that actually flatter each room.

  • Recessed, pendant, track, and under-cabinet lighting installation
  • Dimmer switches and multi-location (3-way and 4-way) controls
  • Full LED conversions that cut lighting energy use
Electrician installing a modern GFCI outlet into a wall

Outlet & Switch Installation Near Me

Starting at: Call for pricing

Two-prong outlets, dead outlets, switches that spark — small annoyances that usually point to something worth fixing. Electrical Service Precision Pros adds, replaces, and relocates outlets and switches, upgrades kitchens and baths to GFCI protection, and installs USB combo outlets where you charge everything. Every device is wired to code and tested before we leave.

  • New outlet and switch installation anywhere you need them
  • GFCI protection for kitchens, bathrooms, garages, and outdoors
  • AFCI protection for bedrooms and living areas where required
Smart thermostat and light switches glowing in a modern living room

Smart Home Automation Near Me

Starting at: Call for pricing

Smart home tech is only smart when it's installed right — neutral wires where they need to be, strong coverage where it counts, and everything talking to one app instead of six. Electrical Service Precision Pros installs smart switches, thermostats, doorbells, locks, and voice-controlled lighting, wired and configured to work together. Already have a box of gadgets that won't cooperate? We sort that out too.

  • Smart switches, dimmers, and outlets with proper neutral wiring
  • Video doorbells, smart locks, and security camera wiring
  • Smart thermostats installed and configured
Newly installed smoke and carbon monoxide detector on a hallway ceiling

Smoke & CO Detector Installation Near Me

Starting at: Call for pricing

Detectors only save lives when they are in the right spots, wired together, and not past their prime. Electrical Service Precision Pros installs interconnected smoke and carbon monoxide detectors so the whole house hears the alarm. Call (833) 606-5080 to bring your home's detection up to date.

  • Interconnected smoke and CO detector installation
  • Hardwired units with battery backup
  • Placement planned for bedrooms, halls, and living areas
Electrician pulling new cable through wall framing during whole-house rewiring

Whole House Rewiring Near Me

Starting at: Call for pricing

Homes wired decades ago with aluminum wiring, knob-and-tube, or brittle cloth-insulated cable weren't built for today's electrical loads. Whole-house rewiring from Electrical Service Precision Pros replaces aging wiring with modern copper, adds grounded outlets where you need them, and brings the entire system up to current code. We plan the work room by room to keep disruption — and drywall repair — to a minimum.

  • Replacement of aluminum, knob-and-tube, and cloth-insulated wiring
  • New grounded outlets and dedicated circuits throughout
  • Code-compliant panel, grounding, and bonding upgrades
Surge protection device installed beside breakers in an open electrical panel

Whole House Surge Protection Near Me

Starting at: Call for pricing

Power surges do not just come from lightning — everyday grid switching sends small spikes through your wiring. Electrical Service Precision Pros installs whole-house surge protectors at your electrical panel to shield everything downstream. Call (833) 606-5080 to add a layer of protection to your home.

  • Whole-house surge protector installed at the main panel
  • Point-of-use protector options for sensitive electronics
  • Grounding system check during the visit
Electrician upgrading a home breaker panel
Why Lenexa Homeowners Call Us

Straightforward electrical work, done right the first time

•No-pressure quotes: Every estimate is written, itemized, and without surprises. You decide on your timeline, not ours.
•Real troubleshooting: Flickering lights, dead outlets, and breakers that trip for no obvious reason — we find the actual cause, not just the symptom.
•Code-savvy crews: Lenexa inspectors pay attention to the details. Our work is done to pass the first time, permits included.
•Panel and service specialists: Upgrading from a worn-out 100-amp panel to modern 200-amp service is one of our most common Lenexa jobs.
•Whole-home safety mindset: While we're in your panel, we check grounding, surge exposure, and detector placement, and flag anything that worries us.
•Tidy, careful work: Floors covered, walls protected, and every switch plate back on straight. You shouldn't find evidence we were there except better power.
•Clear scheduling: We give you an arrival window and keep it. If a part delay or a utility coordination pushes a job, you hear about it from us first.

Electrical Problems We Fix in Lenexa

Tired breaker panels in older ranches

Many ranch homes around Old Town and the older Lenexa streets still run on their original panels. These are often 100-amp boxes from the sixties or seventies, well past their useful life. The breakers may not trip when they should, the bus bar can corrode, and there is no room left for modern circuits. We swap those panels for current 200-amp equipment, coordinate the meter work with Evergy, and handle the city permit and inspection.

Two-prong outlets and no grounding

Ungrounded two-prong outlets show up in a lot of mid-century Lenexa homes. They are a hassle for three-prong appliances and a real issue for anything with a metal chassis, from washing machines to computers. We convert these to properly grounded outlets. We add GFCI protection where code calls for it — kitchens, bathrooms, garages, and outdoors — and make sure the grounding path actually goes somewhere.

Flickering lights and mystery power dips

Lights that dim when the air conditioner kicks on usually point to something specific. So do outlets that work only sometimes. The cause is often a loose connection, an overloaded circuit, or a main breaker that is wearing out. These are the problems that get worse quietly, and a loose connection in a panel or junction box is a genuine heat risk. We trace the circuit, find the weak point, and fix it — sometimes that means a panel service, sometimes just one bad splice.

Lightning and storm surge damage

Johnson County gets its share of spring and summer storms. One close lightning strike can take out a garage door opener, a refrigerator control board, and a home office in a single flash. Point-of-use surge strips help, but they cannot catch everything. We install whole-house surge protection at the panel so a surge from the utility line gets shunted before it spreads through the house wiring.

Outlets and circuits that can't keep up

Older Lenexa kitchens were built for a toaster and a coffee maker, not a pair of air fryers, an espresso machine, and a microwave running at once. Home offices add space heaters and multiple monitors to rooms wired for one lamp. We add dedicated circuits, extra outlets where they are actually needed, and USB-equipped receptacles in the spots where phones and tablets live.

Preparing for an EV charger

EVs are common in Lenexa's newer subdivisions, and a standard garage outlet charges painfully slowly. Most homeowners want a 240-volt charging circuit, which usually needs panel space, the right breaker, and a clean run to the garage. We assess your panel's spare capacity first. Some homes need a panel upgrade before the charger goes in. Either way, we install the circuit so the car charges overnight on schedule.

How Our Service Visits Work

1

Tell us what's going on

Call (833) 606-5080 and describe the issue in your own words. Flickering lights, a dead outlet, a panel that feels warm — whatever it is, we will ask a few questions and book a visit that fits your day. You don't need to know the technical term for it; just tell us what you are seeing and hearing.

2

We diagnose before we quote

On site, we look at the actual problem: testing circuits, opening the panel, checking connections. You get a plain-language explanation of what we found and what your options are, with a written price before any work starts. No work happens until you approve the quote.

3

Permits and utility coordination

If the job needs a city permit or Evergy meter work — panel upgrades and service changes usually do — we pull the permit and line up the utility visit. You don't manage any of that paperwork yourself. We also flag Lenexa's detector-upgrade expectations before inspection day so nothing comes as a surprise.

4

The work, done cleanly

We protect your floors and furniture, keep the work area contained, and install everything to code. Small repairs are usually finished the same visit. Bigger jobs get a clear schedule you can plan around, and we keep you posted if anything changes along the way.

5

Testing and walkthrough

Every circuit gets tested under load before we leave, and we walk you through what was done. You can ask questions about anything we touched. If an inspection is required, it happens on schedule, and we stand behind the work that gets inspected.

Client Experience

What to Expect Working With Us

"Our panel was original to the house and the breakers were getting sketchy. Electrical Service Precision Pros walked us through why a 200-amp upgrade made sense, pulled the permit, coordinated with the utility, and had it all done in a day. They even told us about the smoke detector requirement before the inspector did."

- Lenexa homeowner

"Half the outlets in our kitchen were two-prong and the inspector flagged them when we sold. These folks converted everything, added GFCI protection, and cleaned up so well you'd never know they were here. Honest pricing and zero upsell pressure."

- Lenexa customer

"We needed a 240-volt circuit run to the garage for our EV. They checked the panel capacity first, told us we had room without an upgrade, and the charger has worked perfectly since. Clear communication from the first call to the final test."

- New-build homeowner

Our Lenexa Service Area

We serve Lenexa across its covered ZIP codes, 66215 and 66220. That includes Old Town and the older ranch neighborhoods along the Santa Fe Trail corridor. It also covers the City Center area around the Lenexa Public Market. Add in the office parks and mixed-use blocks along 87th Street and Renner, plus the newer subdivisions spreading west toward K-10. Homes near Black Hoof Park and Lake Lenexa, the townhome communities off 95th, and the commercial corridors along I-435 are all part of our regular route. Whether it's a panel upgrade in a sixties ranch or an EV charger in a home built last year, this is the ground we cover every week. Jobs just outside these ZIPs in neighboring Johnson County communities may also be reachable depending on the size of the project. The simplest way to check is to ask. Don't see your ZIP code? Call (833) 606-5080 and we'll confirm coverage.

Service Areas by ZIP Code

We provide professional Electrician services in the following ZIP codes

66215
66219
66220
66227

Don't see your ZIP code? Contact us to verify service availability in your area.

Frequently Asked Questions

Scope comes first: a single faulty outlet is a short visit, while a panel upgrade or full rewire involves more labor, materials, and city inspection steps. The age of your home matters too — opening up a finished basement in a Lenexa ranch takes more time than working in an unfinished garage. Panel upgrades that need Evergy meter coordination add a scheduling step. Emergency calls cost more in effort than planned work. A written quote after seeing your specific setup always beats a guess, so call (833) 606-5080 and we'll price your job before we start.
Panel upgrades, service changes, and new circuits in Lenexa typically need a city permit and an inspection — that is standard, not a scare tactic. The work also has to meet current code, which is why we plan detector placement, grounding, and GFCI protection into the quote. One Lenexa-specific heads-up: inspectors may ask that smoke detectors be brought up to current standards when an electrical permit is pulled. We raise that during the quote so there are no surprises at inspection, and we handle the permit paperwork for you.
If your panel is original to a mid-century Lenexa home, it's worth a professional look. Signs it needs attention include breakers that trip constantly, a panel that feels warm, visible rust or corrosion, or simply no open slots for new circuits. A 100-amp panel can also be a bottleneck once you add an EV charger, a hot tub, or a kitchen remodel. We inspect the panel, explain what we see, and only recommend replacement when the condition actually warrants it.
Yes — EV charger installation is one of our most common calls in Lenexa's newer neighborhoods. Most homeowners want a 240-volt circuit so the car charges overnight on a Level 2 charger. First we check whether your panel has spare capacity and a spare breaker slot. If it does, we run a dedicated circuit to the garage and install the charger. If the panel is maxed out, we'll explain your options, which may include a panel upgrade first.
Kansas storm season makes it worth considering. Lightning doesn't have to hit your house directly. A strike nearby can send a surge through the utility lines. Anything with a circuit board is at risk: HVAC controls, appliances, garage door openers, and computers. Plug-in surge strips protect individual devices but can't catch everything. A whole-house surge device installed at your panel guards the entire electrical system at once, and we often recommend pairing it with point-of-use strips for sensitive electronics.
A brief dim when a big appliance starts is common, but persistent flickering or dimming is a sign something needs attention. It can mean an overloaded circuit, a loose connection in the panel or a junction box, or a main breaker that's wearing out. Loose connections generate heat, so this is one of those problems you don't want to ignore for months. We trace the affected circuits, find the weak point, and fix it — sometimes it's a single bad connection, sometimes the panel needs service.
Full rewiring is a big job, so it's worth knowing the real warning signs. Look out for aluminum branch wiring from the sixties and seventies, cloth-insulated wiring, frequent breaker trips, burning smells from outlets, or scorched outlet covers. Many Lenexa homes don't need a full rewire — targeted fixes like grounded outlets, new dedicated circuits, and a panel upgrade solve most problems. We assess what you actually have and recommend the smallest fix that genuinely solves it.
Yes. We install landscape lighting, motion-sensor security lights, and exterior outlets for Lenexa homes and businesses. Outdoor work means weather-rated fixtures, proper GFCI protection, and wiring that's safe for Kansas weather. If your HOA has rules about fixture styles or light levels, bring them to the quote visit — it's much easier to plan around them before the fixtures go up.
Yes — both ZIP codes are in our covered service area, and we work across Lenexa weekly. If you're in a neighboring Johnson County community just outside those ZIPs, call (833) 606-5080 and we'll confirm coverage.

Electrician Service Area in Lenexa, Kansas

We provide fast and reliable Electrician services throughout Lenexa and surrounding areas. Call us about emergency repairs and installations and we will explain the next steps.

Get in Touch

Need expert Electrician services in Lenexa, Kansas? Fill out our form below and we'll get back to you quickly.

Call (833) 606-5080