Expert Electrician Services in Salt Lake City, Utah

Salt Lake City wiring contends with historic Avenues homes, inversion-driven electrification, and Wasatch storms that tear service masts off houses. Electrical Service Precision Pros rewires with care, rebuilds storm damage, and upgrades panels for heat pumps and EVs — licensed, insured, permitted, and inspected. Call (833) 606-5080.

(833) 606-5080

Content last reviewed September 25, 2026

Electrical Work for Salt Lake's History, Air, and Storms

Salt Lake City's electrical work is shaped by three forces: old houses, bad air, and hard weather. In the Avenues and on the east bench, century-old houses still run wiring installed when electricity itself was new. Winter inversions trap pollution in the valley, pushing homeowners toward heat pumps and EVs that demand more from their panels. And Wasatch storms — heavy wet snow on leafed trees, summer lightning, wildfire-season grid stress — punish every weak point in the system. Electrical Service Precision Pros works across all three.

The historic homes are a specialty. Our first job in those houses is protection: mapping live runs so plaster, lath, and trim survive the rewire. Most cable goes in through small openings we patch and texture to match, so the rooms look untouched when we leave. From the street, nothing changes — the craftsmanship that makes these houses special stays exactly as it was. What changes is invisible and profound: a historic home whose wiring a modern inspector would praise.

Electrification is the valley's big shift. The inversions make clean air a civic priority, and heat pumps are replacing gas furnaces across Salt Lake. Most of those homes still run the 100-amp service they were built with — and the upgrade path is straightforward. Those cannot carry a heat pump, an induction range, and an EV charger at once. We are the electrical half of that transition: load calculations from real equipment specs, service upgrades to 200 amps, and dedicated circuits for every new load.

Storms write their own chapter. That surprises homeowners every winter — the power company owns the meter, but everything it attaches to is yours. No rebuilt entrance, no power: the reconnect order waits until the mast is rebuilt and inspected. Our storm calls jump the queue, and we stay on the utility's schedule until your lights are back. Summer brings the other storm: afternoon lightning that fries electronics across the street.

Surge protection ties it together. The damage rarely comes from a direct hit — nearby strikes and the grid's rough restart do most of it. Replacing one fried HVAC board costs more than the protector that would have saved it. A single panel-mounted unit intercepts the spike before it travels downstream. We install it during most panel upgrades, verify the grounding it depends on, and leave the home ready for whatever the Wasatch delivers next.

Two more valley realities shape the work. The Wasatch Fault means seismic strapping and flexible conduit belong in every panel and equipment install. And the daylight basement is Salt Lake's favorite addition — bedrooms, offices, and in-law apartments that need full electrical design before the framing starts. Add Rocky Mountain Power's time-of-day rates rewarding overnight EV charging, and the modern valley home is an electrical project in the best sense. We plan for all of it.

Our electrician team at work on a home service call

Who We Are

Electricians built for the Wasatch Front

The Wasatch sets the terms for electrical work in Salt Lake City. Wet snow finds the weak service mast. Summer lightning finds the unprotected panel. Inversions push the whole valley toward electrification faster than its panels can handle. Electrical Service Precision Pros builds for all of it. Every electrician we send is licensed and insured, and each has spent years inside this valley's housing — historic brick, post-war rambler, new suburb. Avenues historic homes with layered old wiring, post-war ramblers with maxed-out panels, and new suburbs whose builder-grade electrical is already outgrown. We rewire with restraint, rebuild storm damage fast, upgrade panels for the electric future, and permit every job.
  • •Historic-home restraint: rewiring that preserves plaster, brick, and woodwork.
  • •Storm-damage speed: service masts rebuilt fast with utility coordination.
  • •Electrification fluency: heat pump and EV plans built around your actual equipment, not rules of thumb.
  • •Surge defense as default: most of our panel upgrades leave with whole-home protection wired in.
  • •Sizing by math: load calculations set the service size, never guesswork.
  • •Permit care: Salt Lake City filings and inspections done right.

Professional Electrician Services in Salt Lake City, Utah

Trusted Electrician solutions for residential and commercial properties, with clear communication and careful work.

Newly installed ceiling fan in a bright modern living room

Ceiling Fan Installation Near Me

Starting at: Call for pricing

A ceiling fan can make a room feel noticeably cooler without touching the thermostat — but only if it's mounted to a fan-rated box and wired correctly. Electrical Service Precision Pros installs and replaces ceiling fans with proper bracing, balanced blades, and the right controls, including remote and wall-switch options. If your current fan wobbles or hums, we can fix that too.

  • Installation on fan-rated boxes with proper ceiling bracing
  • Wiring for separate fan and light control
  • Remote, wall-switch, and smart control options
Electrician testing circuit breakers with a digital multimeter

Circuit Breaker Repair & Replacement Near Me

Starting at: Call for pricing

A breaker that trips now and then is doing its job — one that trips weekly, buzzes, or smells hot is telling you something is wrong. Electrical Service Precision Pros diagnoses whether the problem is a failing breaker, an overloaded circuit, or a deeper wiring issue, then repairs or replaces only what actually needs it. You get a straight answer and a panel you can trust again.

  • Diagnosis of chronic tripping, buzzing, or overheating breakers
  • Replacement of worn, damaged, or recalled breakers
  • Dedicated circuits added for overloaded rooms and appliances
Electrician closing a modern labeled breaker panel during a panel upgrade

Electrical Panel Upgrades Near Me

Starting at: Call for pricing

Electrical Service Precision Pros upgrades and replaces electrical panels so your home can safely handle the power you use today. If your breakers trip often, your panel is outdated, or you are adding big loads like an EV charger, we will inspect it and explain your options plainly.

  • Full panel inspection that checks breakers, bus bars, wiring, and grounding before any work starts
  • Panel replacement sized to your real electrical load, not a guess
  • New breakers and clearly labeled circuits so you know what controls what
Electrician inspecting a breaker panel with a clipboard and thermal camera

Electrical Safety Inspections Near Me

Starting at: Call for pricing

Most electrical problems announce themselves quietly — a warm outlet here, a flickering light there — until they don't. A safety inspection from Electrical Service Precision Pros checks your panel, wiring, outlets, grounding, and smoke/CO detectors against current code, and gives you a plain-language report of what's fine, what to watch, and what needs attention now. Ideal before buying, selling, or renovating.

  • Full panel inspection: breakers, labeling, corrosion, and capacity
  • Outlet and switch testing including GFCI/AFCI function
  • Grounding and bonding verification
Wall-mounted Level 2 EV charger plugged into an electric car in a home garage

EV Charger Installation Near Me

Starting at: Call for pricing

Charging at home beats hunting for a public station every week. Electrical Service Precision Pros installs dedicated Level 2 EV chargers wired straight to your panel, sized for your car and your daily driving. Call (833) 606-5080 and we will set up home charging that fits your routine.

  • Level 2 (240-volt) home charger installation
  • Panel load calculation before we size the circuit
  • Dedicated circuit run from panel to charger location
Standby home generator installed on a concrete pad beside a house

Generator Installation Near Me

Starting at: Call for pricing

When the power goes out, a standby generator keeps your home running without you lifting a finger. Electrical Service Precision Pros installs whole-home generators that start on their own the moment the grid drops. Call (833) 606-5080 to find the right size for your home.

  • Whole-home standby generator installation
  • Automatic transfer switch wired to your panel
  • Generator sizing based on your actual loads
Modern kitchen with new recessed and pendant lighting

Lighting Installation Near Me

Starting at: Call for pricing

Good lighting changes how a home feels and how it works. Electrical Service Precision Pros installs recessed lights, pendants, under-cabinet lighting, dimmers, and smart switches — wired cleanly and safely to code. If you're switching the whole house to LED, we help you pick fixtures that actually flatter each room.

  • Recessed, pendant, track, and under-cabinet lighting installation
  • Dimmer switches and multi-location (3-way and 4-way) controls
  • Full LED conversions that cut lighting energy use
Electrician installing a modern GFCI outlet into a wall

Outlet & Switch Installation Near Me

Starting at: Call for pricing

Two-prong outlets, dead outlets, switches that spark — small annoyances that usually point to something worth fixing. Electrical Service Precision Pros adds, replaces, and relocates outlets and switches, upgrades kitchens and baths to GFCI protection, and installs USB combo outlets where you charge everything. Every device is wired to code and tested before we leave.

  • New outlet and switch installation anywhere you need them
  • GFCI protection for kitchens, bathrooms, garages, and outdoors
  • AFCI protection for bedrooms and living areas where required
Smart thermostat and light switches glowing in a modern living room

Smart Home Automation Near Me

Starting at: Call for pricing

Smart home tech is only smart when it's installed right — neutral wires where they need to be, strong coverage where it counts, and everything talking to one app instead of six. Electrical Service Precision Pros installs smart switches, thermostats, doorbells, locks, and voice-controlled lighting, wired and configured to work together. Already have a box of gadgets that won't cooperate? We sort that out too.

  • Smart switches, dimmers, and outlets with proper neutral wiring
  • Video doorbells, smart locks, and security camera wiring
  • Smart thermostats installed and configured
Newly installed smoke and carbon monoxide detector on a hallway ceiling

Smoke & CO Detector Installation Near Me

Starting at: Call for pricing

Detectors only save lives when they are in the right spots, wired together, and not past their prime. Electrical Service Precision Pros installs interconnected smoke and carbon monoxide detectors so the whole house hears the alarm. Call (833) 606-5080 to bring your home's detection up to date.

  • Interconnected smoke and CO detector installation
  • Hardwired units with battery backup
  • Placement planned for bedrooms, halls, and living areas
Electrician pulling new cable through wall framing during whole-house rewiring

Whole House Rewiring Near Me

Starting at: Call for pricing

Homes wired decades ago with aluminum wiring, knob-and-tube, or brittle cloth-insulated cable weren't built for today's electrical loads. Whole-house rewiring from Electrical Service Precision Pros replaces aging wiring with modern copper, adds grounded outlets where you need them, and brings the entire system up to current code. We plan the work room by room to keep disruption — and drywall repair — to a minimum.

  • Replacement of aluminum, knob-and-tube, and cloth-insulated wiring
  • New grounded outlets and dedicated circuits throughout
  • Code-compliant panel, grounding, and bonding upgrades
Surge protection device installed beside breakers in an open electrical panel

Whole House Surge Protection Near Me

Starting at: Call for pricing

Power surges do not just come from lightning — everyday grid switching sends small spikes through your wiring. Electrical Service Precision Pros installs whole-house surge protectors at your electrical panel to shield everything downstream. Call (833) 606-5080 to add a layer of protection to your home.

  • Whole-house surge protector installed at the main panel
  • Point-of-use protector options for sensitive electronics
  • Grounding system check during the visit
Electrician upgrading a home breaker panel
Why Salt Lake City Homeowners Call Precision

Built for history, inversions, and Wasatch storms

•Wasatch-weather awareness: entrances and equipment built for snow, ice, and lightning.
•Historic-district care: Avenues and east-bench homes rewired without disturbing the architecture.
•Storm-season priority: torn-off masts and outage damage jump to the front of the schedule.
•Capacity by arithmetic, not upsell: a subpanel when the load numbers allow it, a service upgrade only when they do not.
•Old-wiring judgment: we know which century-old circuits stay and which go.
•Upfront phased pricing: quotes that respect an old house and a real budget.
•On-time arrival: real windows from a crew that knows the valley.

Salt Lake City's Most Common Electrical Problems

Old wiring in Avenues and east-bench houses

The Avenues, Federal Heights, Yalecrest, and Sugar House hold some of Utah's oldest homes — and their wiring shows it. Attics hide knob-and-tube, walls hide cloth-insulated cable, basements hide fuse boxes — all of it worked over by decades of Wasatch temperature swings. We trace every active run, remove what is dangerous, and fish new grounded cable through plaster walls with the care historic homes demand. The gables and brick stay exactly as they are. Behind the walls, the house joins the modern era.

Storm-damaged service masts the utility will not fix

Rocky Mountain Power is direct about this: the meter is theirs, but the meter base and the overhead service mast belong to the homeowner. Early and late-season snowstorms drop heavy wet snow on trees that still have leaves, and branches take down masts and weatherheads across the valley. When that happens, the utility cannot reconnect you until a licensed electrician rebuilds the entrance and it passes inspection. We rebuild storm-damaged service entrances with heavier sealed hardware, coordinate the inspection, and get the reconnect moving.

Electrification outpacing post-war panels

Salt Lake's winter inversions trap some of the country's worst air pollution in the valley. The response is electrification: heat pumps replacing gas, induction ranges, EV chargers in Sugar House and Millcreek garages. The catch is the panel — post-war ramblers and bungalows overwhelmingly run on 100-amp services. We run real load calculations, upgrade to 200 amps where the numbers demand it, and wire the dedicated circuits heat pumps and chargers need. Clean air starts with a panel that can carry the equipment.

Wasatch lightning and restoration surges

Wasatch Front summers bring violent afternoon thunderstorms. Lightning does not need to hit your house to kill your electronics — a strike on nearby lines sends the surge through the whole street. We see fried HVAC boards, garage door openers, and smart panels every summer. A panel-mounted whole-home surge protector guards every circuit at once, and we verify the grounding system it depends on. Winter brings its own spikes from restoration after snowstorm outages. Year-round, surge protection is the cheapest insurance in the valley.

Minimum-code wiring in the fast-growth subdivisions

The valley's growth keeps pushing outward — Daybreak, Herriman, Riverton, Lehi — and the new builds go up fast. Builder-grade panels, minimum-code wiring, and then life happens: a hot tub, a basement finish, a workshop in the garage, an EV. The original electrical plan runs out quickly. We bring these homes up to the reality: subpanels for additions and shops, dedicated circuits for the heavy loads, and service upgrades where the panel is clearly outgrown. New does not always mean adequate.

Earthquake readiness for panels and equipment

The Wasatch Fault runs along the valley's east edge, and seismic risk shapes smart electrical work. An unsecured panel can tear from its mounts; a toppled water heater can rip gas and electrical connections at once. We strap panels and equipment to structure, use flexible conduit where rigid runs would shear, and make sure emergency disconnects are reachable and labeled. It is not doomsday planning. It is the same habit as surge protection: cheap preparation for an expensive event.

Basement finishing and mother-in-law apartments

Daylight basements are Salt Lake's expansion joint — every growing family looks downstairs eventually. A legal bedroom needs egress, smoke detection tied to the house system, and proper lighting and receptacle circuits. Mother-in-law apartments add a kitchenette and sometimes a separate panel. We design the basement electrical before the framing starts: dedicated circuits, hardwired detectors, and subpanels where the main is full. The permit covers the electrical with the rest of the finish. Done in the right order, it is inspected once and enjoyed for decades.

How Your Salt Lake City Project Moves Forward

1

Start with the house and the project

Call (833) 606-5080 or email info@electricalserviceprecision.com and tell us what you need: a historic-home rewire, storm damage repair, a panel upgrade for electrification, or protection from the next storm. Expect questions on the home's age and panel before we set up a visit. Storm-damage calls get same-day priority.

2

Inspect for old wiring, storm risk, and capacity

We open the panel, test circuits under load, inspect the service entrance and mast for storm vulnerability, and trace old wiring where relevant. Heat pump and EV projects get load calculations run against the equipment specs. You receive written findings with photos, prioritized by urgency.

3

Fixed quote, phased for old houses

Your written quote is fixed before work begins — labor, materials, and permit fees each on their own line. Rewiring can be sequenced — the dangerous circuits first, the rest as budget allows — with each sequence priced separately on its own line. The approved figure is the final figure.

4

Permitted, inspected, and Wasatch-ready

We file the Salt Lake City permit, build the work to the current code, and stay on site while the inspector walks it. Service work includes Rocky Mountain Power disconnect and reconnect coordination. Post-inspection, every circuit is energized and tested, the surge protector is verified live, and each breaker lands on a fresh label. You keep the permit record and a home ready for winter, summer, and everything between.

Client Experience

What to Expect Working With Us

"Our 1905 home had wiring that scared two home inspectors. They traced every live run, rewired in phases around our lives, and the plaster damage was almost nothing. Every phase: permitted, inspected, documented. The house looks exactly the same — it is just safe now, which is everything."

- Historic homeowner in the Avenues

"We were switching to a heat pump and adding an EV charger, and our 100-amp panel was never going to carry both. They ran the real load numbers, upgraded us to 200 amps, and coordinated the whole thing with the utility. The permit passed first try and there is still room to grow."

- Homeowner in Sugar House

"Wet snow tore our service mast half off the house in November. They rebuilt it with heavier hardware the next day, handled the inspection, and got us back on the reconnect schedule fast. Then they added whole-home surge protection while they were at it. One call solved the whole mess."

- Homeowner in Millcreek

Serving Salt Lake City and the Valley

Our Salt Lake City base covers the Avenues and Federal Heights historic districts, Yalecrest and Sugar House, and the east bench foothill neighborhoods. We also serve Liberty Wells and Ballpark, Glendale and Poplar Grove, and the west-side communities. The work follows the housing: historic districts get careful rewiring, post-war areas get electrification panel upgrades, and everywhere gets storm hardening. Around the valley we serve Millcreek and Holladay for growing-family upgrades. Murray and Taylorsville call us for ranch electrical work. West Valley City and West Jordan get suburban panel and subpanel jobs. Sandy and Draper need newer-home upgrades and outdoor living wiring, plus the south-valley growth corridors of Herriman, Riverton, and Daybreak. Whether it is an Avenues rewire, a Sugar House heat pump panel upgrade, or a storm-torn service mast anywhere in the valley, expect the same thing. Licensed and insured electricians, permits and inspections handled, and a written price first. Rewire or torn-off mast, big project or small repair — (833) 606-5080 and info@electricalserviceprecision.com both reach us directly.

Service Areas by ZIP Code

We provide professional Electrician services in the following ZIP codes

84101
84102
84103
84104
84105
84106
84107
84108
84109
84110
84111
84112
84113
84114
84115
84116
84117
84118
84121
84122
84123
84124
84125
84129
84132
84138
84150
84180

Don't see your ZIP code? Contact us to verify service availability in your area.

Frequently Asked Questions

Often in phases. Knob-and-tube cannot be extended or buried under insulation, and the Wasatch freeze-thaw ages cloth insulation faster. The dangerous circuits go first — kitchens, baths, bedrooms — traced and replaced, with the rest following as budget and renovations allow. Most work happens through small openings we patch, with the historic finishes preserved. Call (833) 606-5080 and ask for a knob-and-tube assessment.
You do — the meter base and service mast are homeowner property, and Rocky Mountain Power cannot reconnect until they are rebuilt and inspected. Yes — the mast and meter base are yours, and we handle the whole repair: heavier replacement hardware, the inspection, and the reconnect scheduling. After a storm, call us before you call the utility — the repair has to come first.
The load calculation gives the answer. A single-head mini-split on a modern panel often fits. A whole-home heat pump plus an EV charger will overwhelm a 100-amp rambler panel. The inversion-driven push toward electrification means more Salt Lake homes are hitting that wall every year. We run the numbers against your equipment specs and show you the honest answer.
Service size, wiring condition, replacement scope, and permits determine the cost. A clean panel swap is one job; a full rewire of an Avenues historic home is another. We commit to a fixed written price after the site visit. Call (833) 606-5080 and we will scope it on site.
Yes, and it is one of the smartest investments in the valley. Summer lightning, winter restoration spikes, and the occasional wildfire-season grid event all send surges through homes. One protector at the panel covers the whole house — HVAC, appliances, garage door openers, and every smart device. We include it with most panel upgrades and confirm the grounding it needs.
Almost always, yes. In Salt Lake City, panel replacements, service upgrades, and new circuits all need permits and inspections — and a licensed electrician must do the work. Permits are handled and we meet the inspector on every job. Permitted work protects your resale value and keeps your insurer satisfied.
Yes — it is constant work in the newer suburbs. A load calculation on the main panel comes first; then we size, ground, and install the subpanel for the shop, hot tub, or addition accordingly. If the main panel is genuinely full, we will lay out the complete upgrade route alongside the subpanel option. Either way, the new load gets clean, labeled, code-compliant power.
Yes. The freeze-thaw cycle, heavy snow loads on service drops, and branches weighted with wet snow all punish exterior equipment. We recommend weather-rated, sealed hardware, keeping branches trimmed back from the drop, and a pre-winter check of surge protection and panel condition. If you have lived through a multi-day winter outage, a generator with a proper transfer switch is worth discussing. A note to info@electricalserviceprecision.com books your pre-winter electrical checkup.
Yes — the Wattsmart program covers rebates for efficient equipment, and time-of-day pricing can make overnight EV charging meaningfully cheaper. We plan charger circuits and heat pump loads around those rates and keep the rebate paperwork aligned with the installation. It pays to check the current offerings before the project, since programs change. Call (833) 606-5080 before the project starts.
Walk the shutoffs first: know where the main breaker and the gas shutoff are, and make sure everyone in the house knows too. We can add seismic strapping to the panel and water heater, label every emergency disconnect, and install flexible conduit on vulnerable runs. A battery-backed emergency light in the hallway costs little and matters a lot when the power drops at 2 a.m.

Electrician Service Area in Salt Lake City, Utah

We provide fast and reliable Electrician services throughout Salt Lake City and surrounding areas. Call us about emergency repairs and installations and we will explain the next steps.

Get in Touch

Need expert Electrician services in Salt Lake City, Utah? Fill out our form below and we'll get back to you quickly.

Call (833) 606-5080