Expert Electrician Services in Plano, Texas

Collin County electrical, handled end to end — Plano's electricians for panel upgrades, EV chargers, and storm-ready power.

(833) 606-5080

Content last reviewed October 10, 2026

Plano, Texas — Collin County's boom city

Plano is what a boom looks like when it lands right. The city grew from a farming town into a corporate headquarters hub — Toyota, Frito-Lay, JCPenney — and the population pushed past 290,000. The legacy neighborhoods from the 70s and 80s sit alongside new master-planned developments, and the electrical systems tell the same two-part story.

Texas deregulation shapes everything here. Oncor Electric Delivery owns the grid — the poles, the transformers, the service drops — while retail providers sell the power and send the bill. Homeowners mix the two up constantly, which matters when something goes wrong: your house's side of the meter is your responsibility, and Oncor's side is theirs.

The weather here doesn't do anything halfway. Triple-digit summers run the air conditioning for months, and every condenser in Collin County is pulling hard at 4 PM in August. February 2021's freeze was the other extreme — days without power, burst pipes across the metroplex, and a permanent change in how Texans think about backup power.

Plano's housing stock spans the eras that matter electrically. The older sections carry aluminum branch circuits and 100-amp services; the 90s builds have early-generation panels that are now full; the new construction is modern but often minimal. We work all of it — but the fix for a 1978 ranch and a 2018 two-story are different jobs, and we treat them that way.

The metroplex runs on electricity the way other regions run on gas. EVs charge in the garage, the home office hums all day, the pool pump runs on its own schedule, and the AC never stops in August. A Plano home's electrical system isn't background infrastructure — it's the thing everything else depends on.

Our crews are here daily, from the legacy streets off Park Boulevard to the new developments on the northern edge. We know the neighborhoods, the housing eras, the permit office, and the difference between an Oncor problem and a panel problem. Plano is a city that expects things to work — we make the electrical match.

Our electrician team at work on a home service call

The people behind the panel work

Collin County is our daily territory, and Plano's particular mix — legacy neighborhoods, corporate relocations, Texas heat, Texas deregulation — is the work we do every day. Our crews have upgraded panels in 1970s ranches, wired EV chargers in master-planned garages, remediated aluminum circuits the permanent way, and installed generators that have already carried families through outages. We show up when promised, explain what we find in plain language, and never confuse your side of the meter with Oncor's. Plano is a city that expects competence — from its schools to its corporate campuses — and we hold our electrical work to the same standard.
  • •Texas weather expertise: Systems sized and protected for triple-digit heat and ice-storm freezes.
  • •Measured every time: Load calculations and metering drive every recommendation we make.
  • •Deregulation fluency: We know exactly where Oncor's responsibility ends and yours begins.
  • •Storm readiness: Generators and surge protection scheduled ahead of the seasons that demand them.
  • •Minimal disruption: careful fishing through attics and walls, every opening finished.
  • •Plain written scopes: the work spelled out, priorities ranked, before we begin.

Professional Electrician Services in Plano, Texas

Trusted Electrician solutions for residential and commercial properties, with clear communication and careful work.

Newly installed ceiling fan in a bright modern living room

Ceiling Fan Installation Near Me

Starting at: Call for pricing

A ceiling fan can make a room feel noticeably cooler without touching the thermostat — but only if it's mounted to a fan-rated box and wired correctly. Electrical Service Precision Pros installs and replaces ceiling fans with proper bracing, balanced blades, and the right controls, including remote and wall-switch options. If your current fan wobbles or hums, we can fix that too.

  • Installation on fan-rated boxes with proper ceiling bracing
  • Wiring for separate fan and light control
  • Remote, wall-switch, and smart control options
Electrician testing circuit breakers with a digital multimeter

Circuit Breaker Repair & Replacement Near Me

Starting at: Call for pricing

A breaker that trips now and then is doing its job — one that trips weekly, buzzes, or smells hot is telling you something is wrong. Electrical Service Precision Pros diagnoses whether the problem is a failing breaker, an overloaded circuit, or a deeper wiring issue, then repairs or replaces only what actually needs it. You get a straight answer and a panel you can trust again.

  • Diagnosis of chronic tripping, buzzing, or overheating breakers
  • Replacement of worn, damaged, or recalled breakers
  • Dedicated circuits added for overloaded rooms and appliances
Electrician closing a modern labeled breaker panel during a panel upgrade

Electrical Panel Upgrades Near Me

Starting at: Call for pricing

Electrical Service Precision Pros upgrades and replaces electrical panels so your home can safely handle the power you use today. If your breakers trip often, your panel is outdated, or you are adding big loads like an EV charger, we will inspect it and explain your options plainly.

  • Full panel inspection that checks breakers, bus bars, wiring, and grounding before any work starts
  • Panel replacement sized to your real electrical load, not a guess
  • New breakers and clearly labeled circuits so you know what controls what
Electrician inspecting a breaker panel with a clipboard and thermal camera

Electrical Safety Inspections Near Me

Starting at: Call for pricing

Most electrical problems announce themselves quietly — a warm outlet here, a flickering light there — until they don't. A safety inspection from Electrical Service Precision Pros checks your panel, wiring, outlets, grounding, and smoke/CO detectors against current code, and gives you a plain-language report of what's fine, what to watch, and what needs attention now. Ideal before buying, selling, or renovating.

  • Full panel inspection: breakers, labeling, corrosion, and capacity
  • Outlet and switch testing including GFCI/AFCI function
  • Grounding and bonding verification
Wall-mounted Level 2 EV charger plugged into an electric car in a home garage

EV Charger Installation Near Me

Starting at: Call for pricing

Charging at home beats hunting for a public station every week. Electrical Service Precision Pros installs dedicated Level 2 EV chargers wired straight to your panel, sized for your car and your daily driving. Call (833) 606-5080 and we will set up home charging that fits your routine.

  • Level 2 (240-volt) home charger installation
  • Panel load calculation before we size the circuit
  • Dedicated circuit run from panel to charger location
Standby home generator installed on a concrete pad beside a house

Generator Installation Near Me

Starting at: Call for pricing

When the power goes out, a standby generator keeps your home running without you lifting a finger. Electrical Service Precision Pros installs whole-home generators that start on their own the moment the grid drops. Call (833) 606-5080 to find the right size for your home.

  • Whole-home standby generator installation
  • Automatic transfer switch wired to your panel
  • Generator sizing based on your actual loads
Modern kitchen with new recessed and pendant lighting

Lighting Installation Near Me

Starting at: Call for pricing

Good lighting changes how a home feels and how it works. Electrical Service Precision Pros installs recessed lights, pendants, under-cabinet lighting, dimmers, and smart switches — wired cleanly and safely to code. If you're switching the whole house to LED, we help you pick fixtures that actually flatter each room.

  • Recessed, pendant, track, and under-cabinet lighting installation
  • Dimmer switches and multi-location (3-way and 4-way) controls
  • Full LED conversions that cut lighting energy use
Electrician installing a modern GFCI outlet into a wall

Outlet & Switch Installation Near Me

Starting at: Call for pricing

Two-prong outlets, dead outlets, switches that spark — small annoyances that usually point to something worth fixing. Electrical Service Precision Pros adds, replaces, and relocates outlets and switches, upgrades kitchens and baths to GFCI protection, and installs USB combo outlets where you charge everything. Every device is wired to code and tested before we leave.

  • New outlet and switch installation anywhere you need them
  • GFCI protection for kitchens, bathrooms, garages, and outdoors
  • AFCI protection for bedrooms and living areas where required
Smart thermostat and light switches glowing in a modern living room

Smart Home Automation Near Me

Starting at: Call for pricing

Smart home tech is only smart when it's installed right — neutral wires where they need to be, strong coverage where it counts, and everything talking to one app instead of six. Electrical Service Precision Pros installs smart switches, thermostats, doorbells, locks, and voice-controlled lighting, wired and configured to work together. Already have a box of gadgets that won't cooperate? We sort that out too.

  • Smart switches, dimmers, and outlets with proper neutral wiring
  • Video doorbells, smart locks, and security camera wiring
  • Smart thermostats installed and configured
Newly installed smoke and carbon monoxide detector on a hallway ceiling

Smoke & CO Detector Installation Near Me

Starting at: Call for pricing

Detectors only save lives when they are in the right spots, wired together, and not past their prime. Electrical Service Precision Pros installs interconnected smoke and carbon monoxide detectors so the whole house hears the alarm. Call (833) 606-5080 to bring your home's detection up to date.

  • Interconnected smoke and CO detector installation
  • Hardwired units with battery backup
  • Placement planned for bedrooms, halls, and living areas
Electrician pulling new cable through wall framing during whole-house rewiring

Whole House Rewiring Near Me

Starting at: Call for pricing

Homes wired decades ago with aluminum wiring, knob-and-tube, or brittle cloth-insulated cable weren't built for today's electrical loads. Whole-house rewiring from Electrical Service Precision Pros replaces aging wiring with modern copper, adds grounded outlets where you need them, and brings the entire system up to current code. We plan the work room by room to keep disruption — and drywall repair — to a minimum.

  • Replacement of aluminum, knob-and-tube, and cloth-insulated wiring
  • New grounded outlets and dedicated circuits throughout
  • Code-compliant panel, grounding, and bonding upgrades
Surge protection device installed beside breakers in an open electrical panel

Whole House Surge Protection Near Me

Starting at: Call for pricing

Power surges do not just come from lightning — everyday grid switching sends small spikes through your wiring. Electrical Service Precision Pros installs whole-house surge protectors at your electrical panel to shield everything downstream. Call (833) 606-5080 to add a layer of protection to your home.

  • Whole-house surge protector installed at the main panel
  • Point-of-use protector options for sensitive electronics
  • Grounding system check during the visit
Electrician upgrading a home breaker panel
Why Plano homeowners call us

Why Collin County picks our crew

•Data-driven sizing: every panel, charger and generator sized from measured loads, not rules of thumb.
•Heat-rated work: Installations built for Texas summers, not mild climates.
•Generator fluency: Whole-home standby systems permitted, installed, and tested.
•EV expertise: Chargers wired right the first time, with the service to support them.
•Surge protection: Whole-home and point-of-use defense against North Texas storms.
•Aluminum-wiring know-how: Mid-century circuits remediated the permanent way.
•Plain written scopes: what we're doing and in what order, agreed before tools come out.
•Oncor coordination: Service work handled with the utility so nothing stalls.

Plano's electrical weak points

Legacy neighborhoods outgrowing old panels

Plano's big legacy neighborhoods — the 1970s and 80s builds that made the city — still run on 100-amp services and older panels. Modern life in Plano means central air, home offices, EV chargers, and pools, and those old services give out. We upgrade to 200 amps with room for what's next.

Ice-storm outages after Uri

February 2021 taught North Texas what a winter outage costs. The freeze knocked power out for days, pipes burst across Collin County, and generators became standard equipment. We install whole-home standby units sized for Texas outages — heat, refrigeration, and well pumps through the next deep freeze.

Triple-digit heat straining the service

Texas summer brings triple-digit weeks and air conditioners that never rest. Undersized services, weak compressor starts, and dimming lights when the condenser kicks in are the classic Plano symptoms. We meter the real loads and fix the cause, not the guess.

EV chargers without the capacity

EV adoption in the metroplex keeps climbing, and most Plano garages were wired before anyone thought about charging a car. A charger on an undersized service is a fire risk waiting for a hot August night. We run the load calculation first, then install the right circuit — or upgrade the service.

Lightning and surge damage

North Texas thunderstorms are violent, and deregulation means the grid is the grid. Lightning and switching surges fry compressors, garage-door openers, and home-office gear. A panel-mounted whole-home protector stops the surge at the door instead of letting it loose in the house.

Aluminum branch circuits in older sections

The 1960s-70s aluminum branch circuits still surface in Plano's older sections — connections that loosen and overheat over decades. We remediate with proper copper pigtailing and rated terminations, the permanent fix that insurance underwriters want to see.

The deregulation confusion

Oncor delivers the power and your retail provider bills you, which confuses homeowners into blaming the wrong party when lights flicker. We diagnose whether the problem is on the utility side or yours, and coordinate with Oncor on service work so nothing stalls.

Backyard loads in a wet climate

Pool equipment, hot tubs, and outdoor kitchens are standard Plano features — and they all draw serious power on circuits that get wet. GFCI protection, a continuous equipotential grid, and weather-sealed gear keep the backyard safe instead of dangerous.

How a Plano project runs

1

The opening conversation

Call or message with what's happening — the tripping breakers, the full panel, the generator question. A short conversation about the symptoms, and we'll schedule a visit to see it ourselves.

2

What we find at the panel

We open the panel, trace the branch wiring, and check the trouble spots, then meter the real loads — AC draw, spare capacity, service condition. In deregulated Texas we also pin down whether the problem sits on your side of the meter or Oncor's.

3

The written plan

You get a written scope before anything starts: the work laid out, must-do separated from nice-to-have, permits included. Generator projects get scheduled ahead of the seasons that make them essential.

4

Permits and the utility

Plano's permit office handles the electrical and generator permits, and service upgrades need Oncor's cooperation on the disconnect and reconnect. We file, schedule, and shepherd the whole chain so nothing stalls.

5

Installation day

Clean, code-compliant installs with hardware rated for Texas conditions — weather-sealed outdoors, correct terminations everywhere. We energize and load-test every circuit before sign-off.

6

The final walkthrough

At the end, we walk you through everything that changed, label the panel clearly for future reference, and tidy the work area completely. If anything seems off in the weeks after the work, call us and we'll come sort it out.

Client Experience

What to Expect Working With Us

"Our 1980s panel was full and the AC kept dimming the lights. They coordinated with Oncor, did the 200-amp upgrade in one day, and labeled every circuit. The house finally feels like it was built for how we live."

- Plano homeowner

"After the 2021 freeze we weren't taking chances. They sized the generator for our actual loads, handled the permit and the gas work, and the transfer test was flawless. Last winter's outage we barely noticed."

- Plano homeowner

"They did the load calculation first instead of just quoting a charger, found we needed a small upgrade, and bundled it together. Clean work, one day, permitted and inspected."

- Plano homeowner

"Lightning took out our garage door opener and a TV last summer. After the whole-home protector and the point-of-use units they installed, the next big storm passed with nothing damaged."

- Plano homeowner

"Our living room had one sad ceiling fixture from the eighties. They added recessed lighting throughout in a day, patched everything perfectly, and the room feels twice as big."

- Plano homeowner

Plano, Collin County, and North Dallas

We're in Plano every day — the legacy neighborhoods, the master-planned developments, the corporate corridors along the Tollway and Legacy West. Around Plano we serve Frisco, Allen, McKinney, Richardson, and the rest of Collin County, with crews running the Dallas North Tollway and Highway 121 daily. Most calls get a visit within a day or two; generator season before winter fills the schedule fastest, so fall is the smart time to book. Don't see your ZIP code? Whether you're in Plano, Frisco or Allen, call (833) 606-5080 and we'll confirm your street is covered. From a 1978 ranch with aluminum circuits to a new build with a smart panel, Collin County's electrical is our home turf. Between the Dallas North Tollway, Highway 121, and the legacy neighborhood streets, our crews cover the whole county daily. Fall generator bookings fill the schedule fastest, so book ahead of ice-storm season.

Service Areas by ZIP Code

We provide professional Electrician services in the following ZIP codes

75023
75024
75025
75026
75074
75075
75086
75093
75094

Don't see your ZIP code? Contact us to verify service availability in your area.

Frequently Asked Questions

Oncor Electric Delivery handles the wires and the meter in Plano — the grid, the transformers, the service drops. Your retail provider (TXU, Reliant, Green Mountain, and the rest) buys the power and sends the bill. When lights flicker, the distinction matters: equipment problems inside the house are yours, service problems on the pole are Oncor's.
Load calculations don't care about the zip code — every home gets measured. A 200-amp service handles a charger for most houses; a 100-amp service in an older neighborhood usually needs load management or an upgrade. We run the numbers before you spend, and wire for the second EV you'll probably own in five years.
They were the benchmark — and then the entire state learned that ERCOT's grid can fail under extremes. Since then, generator installs have exploded across Collin County. We size units for the real loads — furnace, refrigeration, a few circuits — and install with automatic transfer so the house keeps running while the grid doesn't.
Zinsco and Federal Pacific panels have documented failure histories — breakers that weld instead of tripping. An otherwise sound panel can still be full or too small for today's loads. We'll inspect yours and give you an honest verdict: keep, upgrade, or replace.
In the 1980s-90s neighborhoods, yes — carefully. We fish new cable through attics and walls with minimal openings, work from the top down, and patch everything. The drywall looks untouched when we leave; the wiring behind it is a generation newer.
Heat is the enemy of electronics, and a panel-mounted protector with proper grounding clamps the spikes before they reach your gear. We size protection for the house and add point-of-use coverage on the expensive items — the HVAC, the office, the entertainment system.
Plano's permits are straightforward — electrical permits, inspections on service work, and generator permits with gas coordination. We fold the entire process into the job so there's no extra trip to the municipal center for you.
Usually a day, Oncor coordination included. We arrange the disconnect and reconnect in advance, keep your power off for the shortest possible window, and finish with a labeled panel and a walkthrough of everything that changed.
It can also be the AC compressor pulling a huge starting surge, or a loose service connection. We meter the actual draw, check the service equipment, and fix the real cause — because replacing the panel when the problem is the compressor costs money and changes nothing.
Twice a year is the honest answer in North Texas — before summer and before winter, the two seasons that punish electrical systems. We check connections, test the surge protection, inspect the outdoor equipment, and confirm the panel isn't running hot under full AC load.
Yes — the outdoor equipment, the surge protection, and the service connections all take a beating from heat and storms. A pre-summer tune-up catches the problems while they're cheap, instead of at 3 PM in August when the AC quits.
In deregulated Texas, yes — but indirectly. Your retail provider sets the bill, Oncor maintains the delivery equipment, and neither one upgrades your panel. What deregulation means for electrical work is that nobody else is coming to fix your house's side of the meter.
Most Plano homes get better value from a quality conventional panel with spare capacity. A smart panel earns its keep alongside solar, batteries, or complicated load control — otherwise it adds cost without adding capability. We'll say straight out which category your home falls into.
Absolutely. We fish the wiring through the attic, cut clean openings, and install IC-rated cans safe for insulation contact. A dark 1980s living room becomes evenly lit and modern, usually in a day — and the drywall stays intact.
Water is reaching something it shouldn't — an outdoor box, a damaged underground feed, a compromised GFCI. Rain-tripped breakers are the system reporting a leak, and it gets worse every storm, not better. We trace it to the source and seal it properly.
Start before the heat: have the panel and connections inspected for looseness, confirm the surge protection is alive, and make sure the AC circuit and service can carry the load. A pre-summer checkup catches the weak links while the weather is still mild — August is the wrong month to discover your service can't keep up.
Yes. A dedicated, properly grounded circuit for the workstation — separate from the space heater and the printer — ends the mid-meeting trips. We add data-friendly grounding and surge protection on the office equipment, which matters when the whole house is running on one income-earning laptop.

Electrician Service Area in Plano, Texas

We provide fast and reliable Electrician services throughout Plano and surrounding areas. Call us about emergency repairs and installations and we will explain the next steps.

Get in Touch

Need expert Electrician services in Plano, Texas? Fill out our form below and we'll get back to you quickly.

Call (833) 606-5080