Electrical Service Precision Pros

Expert Electrician Services in Kaufman, Texas

Kaufman's local electricians for storm-season prep, panel upgrades, and country-property power

(833) 606-5080

Content last reviewed October 10, 2026

Electrical work in the county seat

Kaufman anchors Kaufman County from its historic courthouse square, sitting on US-175 about thirty miles southeast of Dallas. It's a town with deep roots and fast growth — ranch land giving way to subdivisions, century-old homes sharing streets with new builds. Electrical Service Precision Pros wires all of it, from farm-to-market road acreages to the neighborhoods filling in along the highway corridor.

Texas electricity works differently here, and newcomers always ask. Inside Kaufman, Oncor Electric Delivery owns the poles, the wires, and the meters — but you choose your retail electric provider from the competitive market. Outside town, many addresses sit on Trinity Valley Electric Cooperative, whose headquarters is right here in Kaufman. Either way, everything past the meter is yours, and that's the part we service.

Spring in Kaufman County means severe weather. Hail smashes meter bases, straight-line winds tear at service drops, and tornadoes remind everyone why the storm shelter needs its own circuit. We storm-harden service entrances, install whole-home surge protection, and wire generators that keep the fridge cold and the phones charged when the grid goes down.

Summer is the other test. Weeks of triple-digit heat run air conditioners relentlessly, and panels that were fine in April start tripping every August afternoon. We do real load calculations and upgrade services so the house handles the hottest month without flinching — and we make sure the AC's circuit is dedicated and healthy.

The housing mix keeps every kind of work on our schedule. Mid-century homes carry aluminum branch wiring and full 100-amp panels. Rural properties need power trenched to barns, shops, and well pumps. New subdivisions need EV chargers, home offices, and outdoor living circuits. We handle the county's full range.

When you call Electrical Service Precision Pros, you get electricians who know Kaufman — the square, the lake roads, the FM routes. We show up on time, explain the work plainly, price it in writing, and clean up before we leave. That's how you earn a town like this.

Our electrician team at work on a home service call

Who we are

A Kaufman County crew, through and through

We started this company because Kaufman deserved electricians who know the difference between Oncor territory and co-op territory — and who show up for both. Our crew lives in the county, drives these roads daily, and understands everything from a farmhouse service upgrade to a subdivision panel swap. We handle the full residential and light-commercial range: panel upgrades, rewiring, generators, EV chargers, barn and shop power, lighting, and troubleshooting. Every job gets proper load calculations and code-compliant workmanship, whether it's a two-hour service call or a whole property rewire. Storm season is when Kaufman tests every electrician, and it's when we do our best work. Service entrance repairs after hail, generator installs before spring, surge protection before lightning season: we plan the year around the weather so our customers don't have to worry about it. When the job is done, we walk you through everything, label the panel clearly, and leave the place cleaner than we found it. No jargon, no surprises on the invoice.
  • •County knowledge: We know Oncor territory, co-op territory, and the permitting for both.
  • •Storm-season readiness: We plan your electrical around hail, wind, and tornado season.
  • •Written prices: You approve the scope and the cost before we start.
  • •Code-clean work: Every install meets current code and passes inspection.
  • •Respect for property: Drop cloths, careful trenching, full cleanup.
  • •Plain talk: We explain what's wrong and what it costs in words that make sense.

Professional Electrician Services in Kaufman, Texas

Trusted Electrician solutions for residential and commercial properties, with clear communication and careful work.

Newly installed ceiling fan in a bright modern living room

Ceiling Fan Installation Near Me

Starting at: Call for pricing

A ceiling fan can make a room feel noticeably cooler without touching the thermostat — but only if it's mounted to a fan-rated box and wired correctly. Electrical Service Precision Pros installs and replaces ceiling fans with proper bracing, balanced blades, and the right controls, including remote and wall-switch options. If your current fan wobbles or hums, we can fix that too.

  • Installation on fan-rated boxes with proper ceiling bracing
  • Wiring for separate fan and light control
  • Remote, wall-switch, and smart control options
Electrician testing circuit breakers with a digital multimeter

Circuit Breaker Repair & Replacement Near Me

Starting at: Call for pricing

A breaker that trips now and then is doing its job — one that trips weekly, buzzes, or smells hot is telling you something is wrong. Electrical Service Precision Pros diagnoses whether the problem is a failing breaker, an overloaded circuit, or a deeper wiring issue, then repairs or replaces only what actually needs it. You get a straight answer and a panel you can trust again.

  • Diagnosis of chronic tripping, buzzing, or overheating breakers
  • Replacement of worn, damaged, or recalled breakers
  • Dedicated circuits added for overloaded rooms and appliances
Electrician closing a modern labeled breaker panel during a panel upgrade

Electrical Panel Upgrades Near Me

Starting at: Call for pricing

Electrical Service Precision Pros upgrades and replaces electrical panels so your home can safely handle the power you use today. If your breakers trip often, your panel is outdated, or you are adding big loads like an EV charger, we will inspect it and explain your options plainly.

  • Full panel inspection that checks breakers, bus bars, wiring, and grounding before any work starts
  • Panel replacement sized to your real electrical load, not a guess
  • New breakers and clearly labeled circuits so you know what controls what
Electrician inspecting a breaker panel with a clipboard and thermal camera

Electrical Safety Inspections Near Me

Starting at: Call for pricing

Most electrical problems announce themselves quietly — a warm outlet here, a flickering light there — until they don't. A safety inspection from Electrical Service Precision Pros checks your panel, wiring, outlets, grounding, and smoke/CO detectors against current code, and gives you a plain-language report of what's fine, what to watch, and what needs attention now. Ideal before buying, selling, or renovating.

  • Full panel inspection: breakers, labeling, corrosion, and capacity
  • Outlet and switch testing including GFCI/AFCI function
  • Grounding and bonding verification
Wall-mounted Level 2 EV charger plugged into an electric car in a home garage

EV Charger Installation Near Me

Starting at: Call for pricing

Charging at home beats hunting for a public station every week. Electrical Service Precision Pros installs dedicated Level 2 EV chargers wired straight to your panel, sized for your car and your daily driving. Call (833) 606-5080 and we will set up home charging that fits your routine.

  • Level 2 (240-volt) home charger installation
  • Panel load calculation before we size the circuit
  • Dedicated circuit run from panel to charger location
Standby home generator installed on a concrete pad beside a house

Generator Installation Near Me

Starting at: Call for pricing

When the power goes out, a standby generator keeps your home running without you lifting a finger. Electrical Service Precision Pros installs whole-home generators that start on their own the moment the grid drops. Call (833) 606-5080 to find the right size for your home.

  • Whole-home standby generator installation
  • Automatic transfer switch wired to your panel
  • Generator sizing based on your actual loads
Modern kitchen with new recessed and pendant lighting

Lighting Installation Near Me

Starting at: Call for pricing

Good lighting changes how a home feels and how it works. Electrical Service Precision Pros installs recessed lights, pendants, under-cabinet lighting, dimmers, and smart switches — wired cleanly and safely to code. If you're switching the whole house to LED, we help you pick fixtures that actually flatter each room.

  • Recessed, pendant, track, and under-cabinet lighting installation
  • Dimmer switches and multi-location (3-way and 4-way) controls
  • Full LED conversions that cut lighting energy use
Electrician installing a modern GFCI outlet into a wall

Outlet & Switch Installation Near Me

Starting at: Call for pricing

Two-prong outlets, dead outlets, switches that spark — small annoyances that usually point to something worth fixing. Electrical Service Precision Pros adds, replaces, and relocates outlets and switches, upgrades kitchens and baths to GFCI protection, and installs USB combo outlets where you charge everything. Every device is wired to code and tested before we leave.

  • New outlet and switch installation anywhere you need them
  • GFCI protection for kitchens, bathrooms, garages, and outdoors
  • AFCI protection for bedrooms and living areas where required
Smart thermostat and light switches glowing in a modern living room

Smart Home Automation Near Me

Starting at: Call for pricing

Smart home tech is only smart when it's installed right — neutral wires where they need to be, strong coverage where it counts, and everything talking to one app instead of six. Electrical Service Precision Pros installs smart switches, thermostats, doorbells, locks, and voice-controlled lighting, wired and configured to work together. Already have a box of gadgets that won't cooperate? We sort that out too.

  • Smart switches, dimmers, and outlets with proper neutral wiring
  • Video doorbells, smart locks, and security camera wiring
  • Smart thermostats installed and configured
Newly installed smoke and carbon monoxide detector on a hallway ceiling

Smoke & CO Detector Installation Near Me

Starting at: Call for pricing

Detectors only save lives when they are in the right spots, wired together, and not past their prime. Electrical Service Precision Pros installs interconnected smoke and carbon monoxide detectors so the whole house hears the alarm. Call (833) 606-5080 to bring your home's detection up to date.

  • Interconnected smoke and CO detector installation
  • Hardwired units with battery backup
  • Placement planned for bedrooms, halls, and living areas
Electrician pulling new cable through wall framing during whole-house rewiring

Whole House Rewiring Near Me

Starting at: Call for pricing

Homes wired decades ago with aluminum wiring, knob-and-tube, or brittle cloth-insulated cable weren't built for today's electrical loads. Whole-house rewiring from Electrical Service Precision Pros replaces aging wiring with modern copper, adds grounded outlets where you need them, and brings the entire system up to current code. We plan the work room by room to keep disruption — and drywall repair — to a minimum.

  • Replacement of aluminum, knob-and-tube, and cloth-insulated wiring
  • New grounded outlets and dedicated circuits throughout
  • Code-compliant panel, grounding, and bonding upgrades
Surge protection device installed beside breakers in an open electrical panel

Whole House Surge Protection Near Me

Starting at: Call for pricing

Power surges do not just come from lightning — everyday grid switching sends small spikes through your wiring. Electrical Service Precision Pros installs whole-house surge protectors at your electrical panel to shield everything downstream. Call (833) 606-5080 to add a layer of protection to your home.

  • Whole-house surge protector installed at the main panel
  • Point-of-use protector options for sensitive electronics
  • Grounding system check during the visit
Electrician upgrading a home breaker panel
Why Kaufman picks us

Six reasons the county calls our number

•Oncor and co-op fluency: We coordinate with Oncor in town and Trinity Valley Electric Co-op outside it — disconnects, reconnects, and service upgrades handled smoothly.
•Storm hardening: We reinforce service entrances against hail and wind, install whole-home surge protection, and wire generators before the sirens sound.
•Rural property experience: Running power to barns, shops, and well pumps across acreage takes planning for voltage drop and proper trenching. We do it weekly.
•Aluminum wiring remediation: The county's 60s and 70s homes are full of it. We fix the connections with approved methods — no scare tactics, no unnecessary rewires.
•Generator sizing for Texas storms: We calculate your real load and match the generator to it, so the essentials stay on through the outage.
•Fast local response: We're in the county, not in Dallas. When the storm hits, we're already close.

Electrical problems we fix around Kaufman

Panels tripping through August

Triple-digit heat runs the AC for months, and marginal panels give up every afternoon. The main breaker trips, the house goes warm, and resetting it only buys an hour. We calculate the real load and upgrade the service so the hottest month of the year doesn't beat your electrical system.

Hail-smashed meter bases and masts

Kaufman County hail doesn't just dent cars — it cracks meter bases, bends masts, and tears weatherheads loose. A damaged service entrance is a hazard and a common cause of partial power. We repair and replace service entrances and coordinate with the utility on the disconnect and reconnect.

Aluminum wiring in mid-century homes

Homes from the 60s and 70s often have aluminum branch circuits whose connections loosen over time. Loose connections create heat, and heat creates risk. We remediate with approved methods that make the wiring safe without tearing the house apart.

No power to the outbuildings

Barns, shops, and well pumps sit hundreds of feet from the house with no proper power — just an extension cord or an undersized line that sags under load. We trench proper feeders, set sub-panels, and size everything for voltage drop so the equipment gets full power.

Storm shelters with no power

A shelter without light, ventilation, and a charged phone is just a dark hole in the ground. We wire shelters with lighting, receptacles, and ventilation on protected circuits — and we make sure the generator plan covers the shelter too.

Surge damage from spring storms

Lightning and grid switching send spikes through the house every storm season, killing garage door openers, HVAC boards, and anything with a chip in it. We install whole-home surge protection at the panel plus point-of-use protection where it counts.

How we work

1

The call

Tell us what's happening — the symptoms, the age of the place, and whether you're on Oncor or the co-op. We'll ask the right questions and set a time.

2

The look

On site, we inspect the panel, the service entrance, and the problem areas, and we test what needs testing. You see everything we find, explained plainly.

3

The plan and the price

You get a written scope and a price before we start. Repair versus replace, portable versus standby — we lay out the options so you can choose with confidence.

4

The work

We protect your home and property, do the work to code, handle permits and utility coordination, and test every circuit before we call it done.

5

The walkthrough

We label the panel, show you what changed, and explain how the new equipment works. Then we clean up and leave you our number for anything down the road.

Client Experience

What to Expect Working With Us

"Hail took out our meter base and half the mast in the spring storms. They had the utility coordinated, the entrance rebuilt, and our power back faster than we expected. They even walked us through the surge protector they added while they were up there."

- In-town homeowner

"They trenched power to our barn and shop across the property and set a sub-panel in each. The welder, the air compressor, and the well pump all run strong now. They knew exactly how to size it for the distance."

- Acreage owner

"Our panel tripped every single August afternoon. They upgraded us to 200 amps, and this summer the AC ran nonstop without a single trip. They labeled everything and cleaned up like they'd never been here."

- Subdivision homeowner

Where we work around Kaufman

Kaufman is home base, from the historic square to the neighborhoods growing along US-175. We serve the whole county — Terrell, Forney, Crandall, Kemp, Scurry, and the rural routes between them — plus the lake communities toward Cedar Creek Lake. In town or out on a farm-to-market road, on Oncor or on the co-op, every customer gets the same careful workmanship and honest pricing. Don't see your ZIP code? Call (833) 606-5080 and we'll tell you straight whether we can reach you, but Kaufman homeowners are right in our backyard.

Service Areas by ZIP Code

We provide professional Electrician services in the following ZIP codes

75142

Don't see your ZIP code? Contact us to verify service availability in your area.

Other Service Areas in Texas

Electrician Services in TerrellElectrician Services in ForneyElectrician Services in SeagovilleElectrician Services in RockwallElectrician Services in Balch SpringsAll Texas Service Areas

Frequently Asked Questions

It depends on where you sit. In town you're on Oncor's delivery system and you pick your own retail electric provider — the bill comes from them, the poles belong to Oncor. Out on the county roads, Trinity Valley Electric Cooperative (headquartered right here in Kaufman) is often the provider. We work with both: we handle your side of the meter and coordinate with whichever utility owns the rest.
Start with the service entrance — the mast, meter base, and weatherhead take the beating. We inspect and reinforce them, add whole-home surge protection for the lightning that comes with the storms, and make sure your generator plan is tested before spring. A little prep beats a lot of repair.
August is peak load: the AC runs nonstop, and every other appliance piles on. If the same breaker trips daily, that circuit is overloaded or the breaker is weakening from years of heat cycling. We find which it is — the fix is usually a dedicated circuit, a new breaker, or a service with more headroom.
Standbys start themselves, run on natural gas or propane, and power the whole house or chosen circuits through the transfer switch — no refueling in the storm. Portables cost less but need manual setup, extension cords or an inlet box, and gasoline on hand. For Kaufman storm season, most homeowners who've lived through a multi-day outage choose the standby.
Yes. A garage sub-panel gives the workshop, the EV charger, and the extra circuits room to grow without cramming the main panel. We run the feeder, set the sub-panel, and balance the loads. It's one of the most useful upgrades for a working garage.
It sits at your panel and clamps voltage spikes — from lightning, grid switching, and storm damage — before they reach your home's wiring. One unit protects everything downstream: the HVAC board, the garage door opener, the appliances. We recommend pairing it with point-of-use protectors at sensitive electronics for layered defense.
Yes. Low-voltage LED landscape lighting sips power and transforms the property at night — path lights, uplights on the trees, and accents on the house. We design the layout, trench the cable properly, and set timers or smart controls. The transformer mounts discreetly and the whole system just works.
Don't panic — aluminum wiring is manageable. The issue is the connections, which loosen as the metal expands and contracts. We inspect every accessible connection and remediate with approved methods, prioritizing the high-load circuits. Most homes don't need a full rewire; they need the connections made right.
Breakers that trip without clear cause, a panel that's completely full, warm or buzzing breakers, flickering across multiple rooms, and panels from brands known for breaker failures. Rust or scorch marks are immediate red flags. We inspect honestly — if the panel has life left, we'll tell you that too.
Yes — it's some of our favorite work. We trench underground feeders from the house or set a separate service, size everything for voltage drop over the distance, and install sub-panels in each building. Lighting, receptacles, 240-volt tool circuits, and well pump feeds all get planned together.
Absolutely. Sheds need a proper feeder — not an extension cord — with a small sub-panel, GFCI-protected receptacles, and lighting that lets you see your work. We trench the line, set the panel, and wire it for the tools you'll actually run.
Usually the pump is wearing out and drawing more current, the pressure switch is sticking, or the circuit is undersized for the pump's starting surge. We test the pump's draw, check the switch and wiring, and make sure the circuit matches what the pump actually needs.
Transformers hum a little by nature, but a loud buzz or a hot transformer means it's failing. They're cheap parts tucked in a closet or basement, and replacement is quick. We swap it and check the chime and button wiring while we're there.
Yes — and every shelter in tornado country should have it. We wire lighting, receptacles for charging phones and running a small fan, and ventilation on protected circuits. We also make sure your generator plan includes the shelter circuit, so it stays powered through the outage.
Yes. Home offices need more than a spare bedroom outlet — we add dedicated circuits for the computer setup, proper lighting that doesn't glare on video calls, and surge protection for the equipment. If the Wi-Fi router lives in the office, we make sure its circuit stays clean too.
Kitchen small appliances draw serious current, and two on one circuit is often too much. The breaker is protecting the wiring. The lasting fix is splitting the countertop across two circuits so the morning routine stops being a math problem. We run the extra circuit and the tripping ends.
Yes. We install a fan-rated box that carries the weight safely — the old light-fixture box usually can't — then wire the fan with separate fan and light control. In Texas heat, a fan lets the AC work less, and the room feels better for it.
A three-prong outlet doesn't promise a ground — plenty of older Kaufman homes have three-prong outlets wired without one. A simple outlet tester tells the story in seconds. We test every outlet, add real grounding where the wiring allows, and protect the rest with GFCIs.
Yes. Motion-sensor floods on the corners, dusk-to-dawn lights over the doors, and path lighting where you walk at night. We use LED fixtures that sip power, aim them to cover the property without blinding the neighbors, and put them on controls that just work.
Yes. RV hookups need a dedicated 30- or 50-amp receptacle on its own circuit, mounted on a proper pedestal or post with weatherproof housing. We run the feeder from the panel, set the pedestal where the rig parks, and make sure the grounding is right — RV electrical is unforgiving of shortcuts.
Treadmills draw a big surge at startup, and on a shared bedroom or garage circuit that's often the last straw. The lasting fix is a dedicated 20-amp circuit for the treadmill. We run it, and the workouts stop tripping the house.
Yes. Bathroom remodels need GFCI-protected receptacles, proper lighting over the vanity, a ventilation fan vented to the outside, and often a dedicated circuit for the heated floor or towel warmer. We wire it all to current code while the walls are open — that's the time to do it right.

Electrician Service Area in Kaufman, Texas

We provide fast and reliable Electrician services throughout Kaufman and surrounding areas. Call us about emergency repairs and installations and we will explain the next steps.

Get in Touch

Need expert Electrician services in Kaufman, Texas? Fill out our form below and we'll get back to you quickly.

Call (833) 606-5080