Expert Electrician Services in Atlanta, Georgia

Atlanta is two cities electrically: intown bungalows with tired wiring and small panels, and booming suburbs running EVs, home offices, and pools off maxed-out panels. We serve both — careful rewires intown, high-capacity upgrades in the suburbs. Call (833) 606-5080 or write to info@electricalserviceprecision.com for a written quote.

(833) 606-5080

Content last reviewed September 25, 2026

Two Atlantas, One Standard of Electrical Work

Atlanta holds two electrical realities at once. Intown neighborhoods like Grant Park, Virginia-Highland, and East Atlanta are full of 1920s bungalows with cloth-covered wiring and 100-amp panels that were plenty when the house was built. The suburbs — Sandy Springs, Alpharetta, Roswell, Marietta — filled with tract homes in the nineties, and those houses now run EVs, offices, and pools off panels that are full. We work in both Atlantas every week.

Buckhead holds one of the densest concentrations of registered EVs in Georgia, and Level 2 home charging is the upgrade everyone asks about. A Level 2 charger wants a dedicated 240-volt circuit, usually 40 to 60 amps, which a 100- or 200-amp panel may or may not have room for. We start with a load calculation on your actual usage, then install the circuit — or add a subpanel, or set up load management that shares capacity safely. Georgia Power coordination is part of the job when the meter or service needs attention.

Intown, the work is older and more delicate. Bungalows from the 1910s and 1920s carry cloth-insulated wiring with no ground, two-prong outlets in every room, and panels tucked into closets or porches. Crawlspaces are tight, plaster is original, and every wire run is a puzzle. We rewire these houses in stages, fishing new grounded circuits through walls with small openings, adding GFCI protection where water is near, and keeping the home's character intact. Most families stay in the house through the whole project.

Summer brings the other Atlanta signature: heat waves that pin air conditioners at full blast and thunderstorms that throw lightning across the metro. An undersized panel sags when every AC on the block starts at once, and one nearby strike can kill control boards, garage openers, and smart thermostats. We size services for real August loads, add dedicated circuits for heavy appliances, and install whole-home surge protection at the panel.

Tell us which Atlanta you live in. Call (833) 606-5080 or email info@electricalserviceprecision.com with the symptoms or the project — a charger, a rewire, a panel with no space left — and we will schedule a visit. You will get a plain-English diagnosis and a written price before work begins, from licensed and insured electricians. One standard, from Grant Park bungalows to Alpharetta two-stories.

Our electrician team at work on a home service call

Who We Are

From bungalows to Buckhead, done right

Drive from Grant Park to Alpharetta and the electrical work changes completely: 1920s bungalows with cloth wiring at one end, 2000s two-stories with maxed-out panels at the other. Electrical Service Precision Pros started in North Augusta, South Carolina, and now serves the Atlanta area as part of a nationwide rollout, bringing years of hands-on experience to both worlds. Our licensed and insured electricians rewire old bungalows without gutting them and size suburban panels for EVs, offices, and additions. Every job begins with a written price you approve, and permits are filed wherever the local code requires them.
  • •EV charger expertise: Level 2 circuits sized to your vehicle, your panel, and how many miles you actually drive.
  • •Bungalow craft: fishing grounded wire through plaster and tight crawlspaces with openings kept small.
  • •Load-based sizing: we measure real demand before recommending a panel size or a charger circuit.
  • •Georgia Power coordination: meter work and service upgrades scheduled with the utility, handled for you.
  • •Storm hardening: whole-home surge protection and panels built for August heat and lightning season.
  • •Paper-first pricing: you sign off on one written number before we start, and it covers labor, materials, and permits.

Professional Electrician Services in Atlanta, Georgia

Trusted Electrician solutions for residential and commercial properties, with clear communication and careful work.

Newly installed ceiling fan in a bright modern living room

Ceiling Fan Installation Near Me

Starting at: Call for pricing

A ceiling fan can make a room feel noticeably cooler without touching the thermostat — but only if it's mounted to a fan-rated box and wired correctly. Electrical Service Precision Pros installs and replaces ceiling fans with proper bracing, balanced blades, and the right controls, including remote and wall-switch options. If your current fan wobbles or hums, we can fix that too.

  • Installation on fan-rated boxes with proper ceiling bracing
  • Wiring for separate fan and light control
  • Remote, wall-switch, and smart control options
Electrician testing circuit breakers with a digital multimeter

Circuit Breaker Repair & Replacement Near Me

Starting at: Call for pricing

A breaker that trips now and then is doing its job — one that trips weekly, buzzes, or smells hot is telling you something is wrong. Electrical Service Precision Pros diagnoses whether the problem is a failing breaker, an overloaded circuit, or a deeper wiring issue, then repairs or replaces only what actually needs it. You get a straight answer and a panel you can trust again.

  • Diagnosis of chronic tripping, buzzing, or overheating breakers
  • Replacement of worn, damaged, or recalled breakers
  • Dedicated circuits added for overloaded rooms and appliances
Electrician closing a modern labeled breaker panel during a panel upgrade

Electrical Panel Upgrades Near Me

Starting at: Call for pricing

Electrical Service Precision Pros upgrades and replaces electrical panels so your home can safely handle the power you use today. If your breakers trip often, your panel is outdated, or you are adding big loads like an EV charger, we will inspect it and explain your options plainly.

  • Full panel inspection that checks breakers, bus bars, wiring, and grounding before any work starts
  • Panel replacement sized to your real electrical load, not a guess
  • New breakers and clearly labeled circuits so you know what controls what
Electrician inspecting a breaker panel with a clipboard and thermal camera

Electrical Safety Inspections Near Me

Starting at: Call for pricing

Most electrical problems announce themselves quietly — a warm outlet here, a flickering light there — until they don't. A safety inspection from Electrical Service Precision Pros checks your panel, wiring, outlets, grounding, and smoke/CO detectors against current code, and gives you a plain-language report of what's fine, what to watch, and what needs attention now. Ideal before buying, selling, or renovating.

  • Full panel inspection: breakers, labeling, corrosion, and capacity
  • Outlet and switch testing including GFCI/AFCI function
  • Grounding and bonding verification
Wall-mounted Level 2 EV charger plugged into an electric car in a home garage

EV Charger Installation Near Me

Starting at: Call for pricing

Charging at home beats hunting for a public station every week. Electrical Service Precision Pros installs dedicated Level 2 EV chargers wired straight to your panel, sized for your car and your daily driving. Call (833) 606-5080 and we will set up home charging that fits your routine.

  • Level 2 (240-volt) home charger installation
  • Panel load calculation before we size the circuit
  • Dedicated circuit run from panel to charger location
Standby home generator installed on a concrete pad beside a house

Generator Installation Near Me

Starting at: Call for pricing

When the power goes out, a standby generator keeps your home running without you lifting a finger. Electrical Service Precision Pros installs whole-home generators that start on their own the moment the grid drops. Call (833) 606-5080 to find the right size for your home.

  • Whole-home standby generator installation
  • Automatic transfer switch wired to your panel
  • Generator sizing based on your actual loads
Modern kitchen with new recessed and pendant lighting

Lighting Installation Near Me

Starting at: Call for pricing

Good lighting changes how a home feels and how it works. Electrical Service Precision Pros installs recessed lights, pendants, under-cabinet lighting, dimmers, and smart switches — wired cleanly and safely to code. If you're switching the whole house to LED, we help you pick fixtures that actually flatter each room.

  • Recessed, pendant, track, and under-cabinet lighting installation
  • Dimmer switches and multi-location (3-way and 4-way) controls
  • Full LED conversions that cut lighting energy use
Electrician installing a modern GFCI outlet into a wall

Outlet & Switch Installation Near Me

Starting at: Call for pricing

Two-prong outlets, dead outlets, switches that spark — small annoyances that usually point to something worth fixing. Electrical Service Precision Pros adds, replaces, and relocates outlets and switches, upgrades kitchens and baths to GFCI protection, and installs USB combo outlets where you charge everything. Every device is wired to code and tested before we leave.

  • New outlet and switch installation anywhere you need them
  • GFCI protection for kitchens, bathrooms, garages, and outdoors
  • AFCI protection for bedrooms and living areas where required
Smart thermostat and light switches glowing in a modern living room

Smart Home Automation Near Me

Starting at: Call for pricing

Smart home tech is only smart when it's installed right — neutral wires where they need to be, strong coverage where it counts, and everything talking to one app instead of six. Electrical Service Precision Pros installs smart switches, thermostats, doorbells, locks, and voice-controlled lighting, wired and configured to work together. Already have a box of gadgets that won't cooperate? We sort that out too.

  • Smart switches, dimmers, and outlets with proper neutral wiring
  • Video doorbells, smart locks, and security camera wiring
  • Smart thermostats installed and configured
Newly installed smoke and carbon monoxide detector on a hallway ceiling

Smoke & CO Detector Installation Near Me

Starting at: Call for pricing

Detectors only save lives when they are in the right spots, wired together, and not past their prime. Electrical Service Precision Pros installs interconnected smoke and carbon monoxide detectors so the whole house hears the alarm. Call (833) 606-5080 to bring your home's detection up to date.

  • Interconnected smoke and CO detector installation
  • Hardwired units with battery backup
  • Placement planned for bedrooms, halls, and living areas
Electrician pulling new cable through wall framing during whole-house rewiring

Whole House Rewiring Near Me

Starting at: Call for pricing

Homes wired decades ago with aluminum wiring, knob-and-tube, or brittle cloth-insulated cable weren't built for today's electrical loads. Whole-house rewiring from Electrical Service Precision Pros replaces aging wiring with modern copper, adds grounded outlets where you need them, and brings the entire system up to current code. We plan the work room by room to keep disruption — and drywall repair — to a minimum.

  • Replacement of aluminum, knob-and-tube, and cloth-insulated wiring
  • New grounded outlets and dedicated circuits throughout
  • Code-compliant panel, grounding, and bonding upgrades
Surge protection device installed beside breakers in an open electrical panel

Whole House Surge Protection Near Me

Starting at: Call for pricing

Power surges do not just come from lightning — everyday grid switching sends small spikes through your wiring. Electrical Service Precision Pros installs whole-house surge protectors at your electrical panel to shield everything downstream. Call (833) 606-5080 to add a layer of protection to your home.

  • Whole-house surge protector installed at the main panel
  • Point-of-use protector options for sensitive electronics
  • Grounding system check during the visit
Electrician upgrading a home breaker panel
Why Atlanta Homeowners Choose Us

•Real EV answers: Tell us the car and the daily miles, and we size the Level 2 circuit to match — no oversized upsell, no undersized guess.
•Bungalow rewires without the gut job: We stage the work room by room, fish wire through existing walls, and patch as we go. Families stay home throughout.
•Suburban panel upgrades: For tract homes with full 200-amp panels, we add subpanels or smart load management so the EV, the office, and the pool all fit.
•Lightning-season protection: Whole-home surge protectors at the panel, plus point-of-use protection for the gear that matters most.
•August-ready services: We size panels and AC circuits for the hottest weeks of the year, not the mild ones.
•Permits without the runaround: Atlanta and the surrounding cities require permits for panel and service work. We file and meet inspectors for you.
•Straight talk on scope: If a subpanel solves it, we will not sell you a full service upgrade. The math decides, and we show you the math.

Electrical Problems We Solve Around Atlanta

100-amp bungalow panels versus modern life

A 1920s bungalow's 100-amp panel was generous when the house ran lights, a radio, and a refrigerator. Add central air, a washer and dryer, a home office, and maybe an EV charger, and the panel is past its design. Breakers trip on summer evenings, and there is no slot left for the next project. We run a load calculation, then solve it properly: a service upgrade, a subpanel, or load management for the charger. The goal is a panel with room for the next decade, not just this year.

Lightning strikes frying home electronics

Atlanta summers bring some of the most frequent lightning in the country, and a strike does not need to hit your house to kill your gear. The surge travels the utility lines and takes out control boards, garage door openers, smart thermostats, and anything with a chip. We install whole-home surge protection at the panel to clamp that energy before it spreads, plus point-of-use protection for sensitive equipment. After a storm, we test what survived and document the damage for your insurance claim.

Cloth wiring and ungrounded bungalow outlets

Intown bungalows often still run cloth-insulated wiring with no equipment ground, feeding two-prong outlets in every room. Computers, TVs, and chargers plugged into ungrounded outlets have no path for fault current and no surge protection worth the name. We replace those runs with modern grounded cable, fished through plaster walls and tight crawlspaces with minimal openings, and add GFCI protection in kitchens, baths, and outdoors. The rooms look the same; the wiring behind them is a century newer.

Maxed-out builder panels in the suburbs

The nineties and 2000s tract homes of Sandy Springs, Alpharetta, Roswell, and Marietta shipped with 200-amp panels that filled up fast. Pool equipment, a workshop, landscape lighting, and now an EV charger all compete for slots. Tandem breakers and creative wiring from past owners make it worse. We audit the panel's real loads, then create room the right way: a subpanel, a service upgrade, or managed charging that shares capacity. No more choosing between the dryer and the car.

EV charger installs with no panel headroom

Buckhead driveways keep filling with EVs, and many of those homes have panels with no spare capacity for a 40- or 60-amp charger circuit. The answer is not always a bigger service. We start with a load calculation on the household's actual draw. Then we pick the right fix: a panel upgrade, a garage subpanel, or a load-management device that pauses charging when the house peaks. You get overnight charging without a service overhaul you did not need.

How Your Atlanta Project Comes Together

1

Start with your project or your symptoms

Call (833) 606-5080 or email info@electricalserviceprecision.com and tell us the goal: a Level 2 charger, a bungalow rewire, a panel with no open slots, or lights that flicker every thunderstorm. We will ask about the home's age, the panel size, and whether you are intown or in the suburbs. Then we set a time to see it in person.

2

Load math and a full walkthrough

On site we open the panel, test circuits, and walk attics, crawlspaces, and the service entry. For chargers and upgrades, we run a load calculation from your actual usage, not a rule of thumb. For bungalows, we map the old wiring and plan routes that protect the plaster. You get findings in plain language before any numbers are discussed.

3

A written price you can hold us to

Every project gets one fixed price in writing: labor, materials, permits, and any Georgia Power coordination included. If options exist — a subpanel versus a full upgrade, or managed charging versus more capacity — we price each and explain the trade-offs in plain terms. Nothing starts until you approve the number, and approved numbers do not change.

4

Installed, inspected, and labeled

We pull the permit, complete the work to code, and meet the inspector with everything ready. When Georgia Power needs to touch the meter or the service, we schedule it as part of the job, not as your errand. We label every breaker, test the circuits under load, and leave the house clean. The charger, the panel, or the rewire is ready the day we finish.

Client Experience

What to Expect Working With Us

"Three companies told us we needed a bigger service for a Level 2 charger. Electrical Service Precision Pros ran the actual load numbers, found the headroom, and installed the circuit without touching the panel size. The charger has run flawlessly for months, and the permit passed the first time."

- EV owner near Buckhead

"Our 1925 bungalow had cloth wiring and two-prong outlets everywhere. They rewired it room by room over three weeks, and we never had to move out. The plaster patching disappeared under paint, every outlet is grounded, and the panel is labeled for the first time."

- Homeowner in Grant Park

"Our 200-amp panel was completely full with the pool, the office, and my wife's EV on the way. They added a subpanel and set up managed charging so everything fits. Clear written price up front, clean work, and the inspector had zero notes."

- Homeowner in Alpharetta

Neighborhoods We Serve Around Atlanta

We cover both Atlantas. Intown, that means Grant Park, Virginia-Highland, and East Atlanta, where 1920s bungalows need rewires, panel upsizing, and careful work around original plaster. Buckhead brings EV charger installs and high-end panel upgrades for homes that run everything at once. North of the city, Sandy Springs, Roswell, and Alpharetta hold the nineties and 2000s suburbs where full panels, home offices, pools, and workshops drive our upgrade work. Marietta and the surrounding west-side suburbs round out the route with the same mix of aging panels and growing demand. Everywhere we go, the promise is identical: licensed and insured electricians, written pricing, permitted and inspected work. Reach out at (833) 606-5080 or info@electricalserviceprecision.com with your neighborhood and we'll line up a visit. If your street sits between the neighborhoods named here, you are still in range. The whole metro is our service area, and we schedule intown and suburban visits on the same routes. Older homes near the city get the bungalow treatment; newer homes farther out get capacity planning — either way, the diagnosis comes before the quote.

Service Areas by ZIP Code

We provide professional Electrician services in the following ZIP codes

30301
30303
30305
30306
30307
30308
30309
30310
30311
30312
30313
30314
30315
30316
30317
30318
30319
30322
30324
30326
30327
30328
30329
30331
30332
30333
30334
30336
30337
30338
30339
30340
30341
30342
30344
30345
30346
30349
30350
30354
30360
30361
30363
30368
30375

Don't see your ZIP code? Contact us to verify service availability in your area.

Frequently Asked Questions

Sometimes, but only the math knows. A Level 2 charger needs a dedicated 240-volt circuit, typically 40 to 60 amps, and a 100-amp bungalow panel may already be near its limit. We run a load calculation on your household's actual draw and check for open slots. If there is room, we install the circuit. If not, we lay out the options — a subpanel, a service upgrade, or load management — with a written price for each.
When the service size changes or the meter needs work, yes. The utility handles the meter and the connection at the street side, while we handle the panel, mast, and everything inside. We schedule that handoff with Georgia Power as part of the job, so you are not making calls or waiting on two timelines. Most upgrades keep the power outage to part of a single day.
If it still runs cloth-insulated wiring with no ground, strongly consider it. That wiring was not designed for modern loads, and ungrounded outlets leave electronics and people less protected. We inspect the attic, crawlspace, and panel first, then rewire in stages so the house stays livable. Not every old house needs a full rewire — sometimes targeted circuit replacements do the job — and we will tell you which one yours needs.
Here more than most places, yes. Atlanta sees frequent summer lightning, and surges travel in on the utility lines to kill control boards, garage openers, and smart devices. A protector at the panel guards the whole house at once, and it costs far less than replacing one fried appliance. We recommend it with nearly every panel upgrade and charger install we do.
It depends on the distance from the panel to the charger. Open slots, spare capacity, the wire route through walls or a crawlspace, and permit fees all shape the price. A panel upgrade or load-management device adds scope. After an on-site visit, we give one fixed written price covering labor, materials, and permits. Call (833) 606-5080 to set up the visit.
For panel upgrades, new circuits, service changes, and rewires, yes — Atlanta and the surrounding cities require permits and inspections. Minor repairs may not need one, but anything that changes capacity or adds circuits does. We file the right permit, do the work to code, and meet the inspector. The permit record also protects you at resale, when buyers ask for documentation.
Heat waves push air conditioners to run longer and harder, and an aging breaker or an undersized circuit gives up under the sustained load. It can also mean loose connections heating up at the panel, which is worth catching early. We test the circuit under load, check the breaker's condition, and verify the wire size matches the breaker. The fix might be a new breaker, a dedicated circuit, or more panel capacity — the testing tells us which.
Yes, with planning. We fish wire through wall cavities and crawlspaces, use the attic for second-floor runs, and open only small access points that patch invisibly. Brick exteriors stay untouched because we work from inside. Most rooms gain their outlets in a day or two with minimal dust. Bungalows demand patience and a light touch, and that is exactly how we work them.

Electrician Service Area in Atlanta, Georgia

We provide fast and reliable Electrician services throughout Atlanta and surrounding areas. Call us about emergency repairs and installations and we will explain the next steps.

Get in Touch

Need expert Electrician services in Atlanta, Georgia? Fill out our form below and we'll get back to you quickly.

Call (833) 606-5080